MILWAUKEE 18V FUEL™ ONE-KEY™ 2 PIECE 2 X 5.0AH COMBO KIT M18ONEPP2A3502C

Includes

• 1 x MILWAUKEE 18V FUEL™ ONE-KEY™ 13mm Hammer Drill/Driver Skin M18ONEPD30
• 1 x MILWAUKEE 18V FUEL™ ONE-KEY™ 1/4″ Hex Impact Driver Skin M18ONEID30
• 2 x MILWAUKEE 18V 5.0Ah Red Lithium-Ion Battery M18B5
• 1 x MILWAUKEE 12V/18V 4.5/6.0Ah Multi Voltage Rapid Charger M12-18FC
• 1 x Side Handle
• 2 x Belt Clips
• 2 x Bit Holders
• 1 x Carrying Case

MILWAUKEE 18V FUEL™ ONE-KEY™ 13mm Hammer Drill/Driver Skin M18ONEPD30

The 18V FUEL™ ONE-KEY™ 13mm Hammer Drill/Driver delivers the capability to drill large holes at high speed into densest materials. The cordless drill is a compact solution that features AutoStop™ Control Mode for Enhanced Safety. The POWERSTATE™ Brushless motor delivers power under load to complete 2-9/16″ Self-Feed holes in dense woods for maximum productivity. At only 175mm in length, this drill offers maximum access and maneuverability in tight spaces. The AutoStop™ Control Mode offers enhanced safety for the operator by preventing over-rotation in a bind-up.

With ONE-KEY™, users gain the ability to Customize, Track and Manage their tool. Operators can customize the AUTOSTOP™ Control Mode with Low, Medium, and High Sensitivity settings. Using the tool’s tracking functionality, if ever lost or stolen, lock it out to protect your investment. The REDLINK PLUS™ intelligence ensures maximum performance and protects from overloads, heating, and over-discharge. The 18V™ REDLITHIUM™ battery packs deliver maximum work per charge. The all-metal ratcheting chuck provides improved grip strength, durability, and corrosion resistance when compared to the previous generation. Our 18V FUEL™ ONE-KEY™ 13mm Hammer Drill/Driver is part of our 18V system which is fully compatible with over 250+ solutions.

• AUTOSTOP™ Control Mode, Enhanced Safety
• Fast Drilling and Driving applications under load
• 13mm all-metal chuck with carbide teeth for maximum durability, grip and bit retention
• All-metal belt clip for portability
• LED light for better visibility in low-light situations
• Only 175mm in length for access into tight spaces and reduced fatigue
• POWERSTATE™ Brushless Motor delivers the power to complete a wide range of applications
• AUTOSTOP Feature to Protect from over rotation in a bind up for enhanced safety, equipped with a dedicated AUTOSTOP light on foot of tool to indicate a protection event
• Mechanical Clutch for consistency in driving a wide range of fasteners
• Hammer Drill Mode for Fast Drilling into Brick, Block or Concrete
• 158 Nm of Torque

Specifications

• Chuck Type: 13mm All Metal Ratcheting
• IPM: 33000
• Peak Torque: 158 Nm (116.5 ft-lbs)

MILWAUKEE 18V FUEL™ ONE-KEY™ 1/4″ Hex Impact Driver Skin M18ONEID30

The 18V FUEL™ ONE-KEY™ ¼” Hex Impact Driver is a powerful and fast driving impact driver, featuring ULTIMATE TRIGGER CONTROL. The POWERSTATE™ Brushless motor delivers the power for a full range of capabilities to complete a wide variety of applications. Increase productivity on the jobsite with fast driving speeds without sacrificing power or control. REDLINK PLUS™ intelligence delivers ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. The 4-mode drive control provides operators with greater control over output speed and power. The self-tapping screw mode provides fast installation time, shutting the hex driver down as soon as the fastener is seated to reduce damage to fasteners and materials. With ONE-KEY™, you gain the ability to Customize, Track and Manage your impact driver. ONE-KEY™ technology also allows you to save up to 4 task settings directly to the tool. If your tool is ever lost or stolen, its tracking functionality can lock it out to protect your investment. This new impact driver also features Tri-LED lighting, illuminating the area of work while eliminating shadows. The 18V FUEL™ ¼” Hex Impact Driver is part of the 18V system which is fully compatible with over 250+ solutions.

• POWERSTATE™ Brushless Motor delivers unmatched power for full range of capability to complete a wide variety of applications
• ULTIMATE TRIGGER CONTROL provides smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials
• Enhanced ONE-KEY™ Self-Tapping Screw mode uses machine learning to stop screws and fasteners when seated to avoid stripping or broken heads due to over driving
• Compact Size (113.5mm) for access in tight spaces
• 226 Nm of torque
• Single Handed Bit Insertion for Ease of Use
• All-metal belt clip for portability
• Tri-LED Lighting for maximum workspace visibility
• 4-Mode Drive Control
• Compatible with all 18V batteries & chargers

Specifications

• Collet Type: 1/4″ Hex
• Length: 114mm
• IPM: 0 – 4,400 ipm
• Peak Torque: 226 Nm

MILWAUKEE 18V 5.0Ah Red Lithium-Ion Battery M18B5

The M18™ 5.0AH REDLITHIUM-ION™ BATTERY features superior pack construction, electronics, and performance to deliver more work per charge and more work over the life of the pack than any battery on the market. M18™ 5.0AH REDLITHIUM-ION™ BATTERY features an advanced design, protecting the pack against harsh jobsite environments. This protection routes water away from the electronics and out of the battery pack, extends run-time and life by minimizing heat, and prevents pack failures from vibration or drops.

This unique to Milwaukee design also allows the battery to operate in extreme cold weather conditions (below OoF/-18oC). Managed by Milwaukee’s exclusive REDLINK™ Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. It also provides full system compatibility with 60+ M18™ cordless solutions. Upgrade to the M18™ 5.0AH REDLITHIUM-ION™ BATTERY to instantly increase the run-time and durability of your M18™ cordless tools.

• REDLINK™ intelligence, provides optimised performance and over load protection
• Best in class construction, offers long lasting performance and durability
• Fuel gauge on board displays remaining run time for less down time on the job
• All weather performance delivers fade free power in extreme jobsite conditions
• 2.5x more run time
• 20% more power than a standard 18V lithium battery
• 2x more life than a standard 18V lithium battery

Specifications

• Platform: M18™
• Charge time:
  • M12-18FC: 60 mins
  • M12-18C: 105 mins

MILWAUKEE 12V/18V 4.5/6.0Ah Multi Voltage Rapid Charger M12-18FC

The 18V & 12V Rapid Charger charges packs up to 40% faster, reducing downtime and maximising productivity. The charger accepts all M18™ and M12™ batteries, providing an upgrade for both systems. Featuring REDLINK™ Intelligence, it communicates directly with the battery to monitor cell voltage, temperature, and charge status to optimise the performance and extend the life of the pack. As an added level of communication, the charger indicates when the battery reaches an 80% charge, providing confidence that a substantial amount of work can be completed without waiting for a full charge.

• Charges batteries up to 40% faster.
• Charges all 12V and 18V batteries.
• Sequential charging: automatically charges the second inserted pack once the first pack is fully charged.
• REDLINK™ Intelligence: charger communicates with the battery pack to ensure optimum performance and extend life
• 18V REDLITHIUM-ION 2.0 Ah / 4.0 Ah / 5.0 Ah / 6.0 Ah / 9.0 Ah battery packs recharge in 26 min / 47 min / 59 min / 68 min/ 95 min or less
• 12V REDLITHIUM-ION 2.0 Ah / 3.0 Ah / 4.0 Ah / 6.0 Ah battery packs recharge in 28 min / 45 min / 57 min / 90 min or less

Specifications

• Platform: 12V
• Charge Time:
  • 2.0Ah: 26 minutes
  • 4.0Ah: 47 minutes
  • 5.0Ah: 59 minutes
  • 6.0Ah: 75 minutes
  • 9.0Ah: 90 minutes